MSC-HD121S Product Manual
Example querying and assigning netmask
>NetMask
255.255.255.0
>NetMask 255.255.255.192
>
3.11.21 P Command
Routers and MSC-GCP2U32 only
Recalls a preset. Each Router system contains 10 presets numbered 0 through 9 which can store the entire
matrix routing state or one or more single destination connections. Preset 0 is recalled on system power up.
Command
Description
P PRESET
Recall a preset.
Example to recall preset 1
>P 1
>
3.11.22 PAdd Command
Routers and MSC-GCP2U32 only
Preset add command. Adds a connection to a preset. This can be used to incrementally create a preset without
changing the active matrix routing. 0 can be used for SRC for Mute (if supported). This command stores preset
information which is retained and available through system power cycles.
Command
Description
PAdd PRESET, DEST, SRC
Add a connection of SRC to DEST on PRESET for all levels.
PAdd PRESET, DEST, SRC, LEVEL
Add a connection of SRC to DEST/LEVEL on PRESET.
Example
>PAdd 1,2,3
>PAdd 1,3,0,2
>
The first command adds a connection from Source 3 to Destination 2 in Preset 1. The second command Mutes
Destination 3 on Level 2 in Preset 1.
3.11.23 PairIO Command
Routers only - Protocol Version: 2.1
NOTE:
Superseded by
I/O pairing is used for pairing destinations/sources for 3D support. When activated a router will appear to have
half the number of physical destinations and sources. A given matrix crosspoint change will cause 2
destinations to be changed. Each odd destination/source is paired with the next highest even number
Page 37 of 60
© 2013-2018 Matrix Switch Corporation
