Matra Nortel MC 2610, User Manual

Page: 12 / 118

How to use the terminal
12
USING THE KEY
While entering a character (depending on V35 software
version)
• pressing the key deletes the last character entered.
While displaying a menu
• one press returns to the next level up.
While displaying an information message
• one press erases the information message.
USING THE CALL KEYS
(Push-to-talk,
, and )
The push-to-talk key on the LS/micro is used to accept a call
or talk during a call. Talking is possible only when the transmit
indicator is on red.
The key is used to place or accept a call.
As an option, a long press on changes the registration base
station or forces registration of the terminal with:
• a base station which is part of the coverage of the preferred
communication if the " P PR RF FC CI IA AL L C CO OM M. . " function is active (see sub-
menu “ O OP PT TI IO ON NS S ” in the Main Menu), or,
• a base station which is part of the preferred Base Network if one has
been defined (see Terminal Menu) or the home Base Network, or,
• a base station with better radio reception quality, or,
• the same base station if none of the above are available.
This function is available when the terminal is on standby, in a group
communication or waiting to enter a group communication.
The key on the CCP or the key on the pear shape micro is used
to end or refuse a call. This key is timed and must be pressed and held
down.
The key is used to send , at any time, an emergency call . This key
is timed and must be pressed and held down.
CLR
CLR
CCP MC2 V35 EN LB 17/10/01 14:12 Page 12