a
b
f
e
d
x 1
180°
*
*
*
b
ROT
ATE T
OP
TRACK
180
°
STAGE 7
READ
ONLY
IF CHANGING
THE DOOR FOR A RH CORNER
INSIDE
VIEW
DO NOT
OVERTIGHTEN
IMPORTANT
FIXED
PANEL
GLASS
THIS
SIDE
ROTATE*
This stage is describing how to reverse the top track to a RH corner and the fitting of the Top Track.
a
. Rotate the track by 180
°
so that the roller block threads are still facing towards the inside of the unit
.
b
. Remove the wall mount top cap and corner extrusion fixings and swap to the opposite sides.
a
. Remove and re-fit the top track glass clamp by swapping to the other side of the track, so it is facing downwards.
e
. Lower the top track into position, ensuring the top track glass clamp, clamps around the top face of the fixed glass panel.
b
. Fit the wall mount top cap and Corner extrusion fixing through the top of the track and into the wall mount and corner extrusion.
c.
The top track can be adjusted left or right . Tighten the top track glass clamp by tightening the socket set screws on both sides
(c).
d.
Important
- tighten the top track locking screw underneath the top track on the fixed panel wall mount to fix the top track into
position.
e
. Fit the glass clamp covers (supplied in the kit of parts) over both sides of the top track glass clamps.
180°
FIXED
PANEL
GLASS
THIS
SIDE
1200
MODEL
ONLY
MODELS
1000 / 1100
1400 / 1500
1600 / 1700
