5
5
HOT MATERIALS
The process of plasma cutting creates an arc of electricity that can be up to 45,000°F (25,000°C). Oxygen-fuel cutting flame
can be up to 6,330°F (3,500°C). As a result, cut materials will be very hot after cutting. Use extreme care when handling
recently cut materials. Proper protective apparel such as protective gloves should be worn when handling recently cut
material. Material handling devices should also be considered. It is recommended to allow material to cool completely
before handling.
MECHANICAL DRIVES
Mechanical drives are in use while the Saddle Machine is in operation. These drives use gears, chains, and drive screws.
These components can move at high speed. Do not attempt to service, adjust, or otherwise touch these components while
the machine is on. Secure loose articles of clothing and cables to prevent entanglement.
AIR LINES UNDER PRESSURE
Certain tools and equipment use compressed air lines to operate. These air lines are under pressure. Hot sparks or flying
debris may cause damage to these lines. Ensure that the air lines are kept free of punctures, burns, or other damage or
defects that could cause failure. Inspect air lines periodically and repair or replace damaged lines.
