Installation
Page 8
4
Delivery and Shipment
The sweeper is rigged to a pallet and delivered.
Lifting the sweeper from the pallet
1. Remove the protective packaging and the transport locks.
2. Lift the sweeper using suitable means (crane or forklift) from the pallet and put it down.
Transport over long distances
If you would like to transport the sweeper over longer distances (e.g. dispatch by
forwarding agency), you must rig the machine to a pallet as at the time of delivery.
5
Installation
Danger!
Switch the tractor off and pull out the ignition key before you assemble or
dismantle the devices mounted on it.
Note!
Enter the chassis number of the front sweeper in the 7.4 section of this
Operating Manual.
5.1
Install Adapter Extension
Depending on the chosen accessories, either an adapter extension rigid (Order No.
131_7733) or adapter extension swing balance (Order No. 131_7734) is mounted to the
basic model.
Figure 1: Adapter extension rigid
Figure 2: Adapter extension Swing balance
Depending on the design of the front hydraulics, hang the front sweeper in the tractor
triangle or the two-point attachment. The first time, the adapter extension may have to be
adjusted depending on the desired lifting height.
