6
Page 17
6
Operation of the front power system
When working on the machine it must be on a level, solid surface and must be
protected against rolling away.
Before starting up the implement, read the instructions on safety and handling
for operation of the entire implement and connection to the tractor. In addition,
prior to start-up you must ensure that the vehicle meets the requirements
specified in the German Road Traffic Vehicle Licensing Act.
The front power system should only be placed in service if all safety devices
are attached and fully functional. Prior to starting work the operator must fa-
miliarize himself with the device and ensure for himself that the entire device is
operationally reliable.
Moving objects and equipment (ropes, chains, rods, etc.) must be sufficiently
secured prior to transport or driving on public roads, in order to eliminate the
possibility of accidents or endangering other people.
All work on the machine may be carried out only if the machine is secured against sudden
startup.
Secure the machine against inadvertent startup by disconnecting it from the
vehicle, or by switching off the vehicle, removing the ignition key and setting
the hand brake.
Attachment of the front power system
To attach the front power system, follow the step-by-step instructions in the assembly man-
ual provided or available for download from our website. When mounting is complete, con-
nect the hydraulic lines of the front power system to the hydraulic connections on the control
unit on the tractor (raise; lower). Use cable ties to fasten the hydraulic hoses along the tractor
frame to the control unit.
Caution!
Connection positions in Figure 7 when used without a front-end loader!
