M A T E L E C A U S T R A L I A . P 1 8 0 0 2 8 1 2 8 2 . F 1 3 0 0 2 8 1 2 8 2
I N F O @ M A T E L E C A U S T R A L I A . C O M . A U . W W W . M A T E L E C A U S T R A L I A . C O M . A U
• All interconnected alarms must be connected to the same sub/circuit
• A common Neutral must be used for interconnect to function
• Do not connect the interconnect wires to Active or Neutral
Status Description
Status
Indication
Description
Standby status
The Red LED flashes every 40
seconds, with no Green LED.
Operating under battery power
only.
AC power indication
The Green LED is continuously
illuminated
The unit is operating under AC
power.
Low battery warning
The unit chirps, with Red LED flash-
ing every 40 seconds.
Battery voltage is low – replace
battery
Self-test fault warning
The Red LED flashes twice every
40 seconds.
The buzzer fault or buzzer
detection circuit fault.
End-of-life warning
The unit chirps between the Red
LED flashing twice
The unit will send end-of-life warn-
ing after 10 years of operation.
Alarm must be replaced.
Test function
The Red LED flashes once every
second, with alarm sounding until
the TEST button is released.
• Test by pressing the TEST button
on the smoke alarm for at least 5
seconds.
• The alarm will sound if all elec-
tronic circuitry, buzzer and battery
are working properly.
Silence function
The Red LED flashes every 8
seconds.
• This smoke alarm has a built-in
Silence feature.
• If cooking or other
non-hazardous sources cause
the alarm to sound, it can be
temporarily silenced by pressing
the HUSH button for a minimum 2
seconds.
• The alarm enters silence mode
for 10 minutes.
• After the 10-minute dormant
period, the smoke alarm will
resume normal operation
Interconnection alarm
Alarm sounds without Red LED
flashing.
Occurs when another
interconnected alarm is triggered.