Matelec FSA-60000 Quick Start Manual Download Page 1

M A T E L E C   A U S T R A L I A .   P   1 8 0 0   2 8 1   2 8 2 .   F   1 3 0 0   2 8 1   2 8 2

I N F O @ M A T E L E C A U S T R A L I A . C O M . A U .   W W W . M A T E L E C A U S T R A L I A . C O M . A U

•  This product must only be used for the purpose described in these instructions and must be installed in  
 

accordance with local wiring rules and regulations.

Main Power Source

220-240 V AC/50 Hz

Secondary Power Source

DC 3V battery: CR17450

AC Operating Current

<100mA

Interconnecting

Max. 24 alarms (wired 150m maximum)

Operating Temperature

0 °C to 40 °C

Ambient Humidity

≤ 93%

Alarm Sensitivity

0.118-0.169 dB/m

Alarm Volume

≥ 85dB(A) @ 3m

Sound Pattern

ISO8201(BI 0.5s - pause 0.5s- BI 0.5s - pause 

0.5s - BI 0.5s - pause 1.5s, with the RED LED 

flashing, repeat this alarm pattern)

Complies with

AS3786:2014

THIS SMOKE ALARM MUST BE INSTALLED BY A LICENSED ELECTRICIAN IN ACCORDANCE 

WITH AUSTRALIAN WIRING RULES

  

SMOKE ALARM FSA-60000

240Vac c/w 3V DC Battery Backup Photoelectric Smoke Alarm

TM

AC

TIVFIRE

    

   

D

E

T

S

I

L

Compatible

with the FSA-50000 

Wireless Interconnect

module

*Sold Separately.

Summary of Contents for FSA-60000








Reviews: