2
WELCOME TO DUAL PUMP CONTROL
SAFETY
2
CIRCUIT DIAGRAM
7
INSTALLATION
3
AT A GLANCE
8
GETTING STARTED
4
CONTENTS
SAFETY
registered electrician
• Prior to installation, ensure power supply is isolated
• Power supply must be circuit breaker protected (Qualified electrician to determine appropriate amp rating).
•
RCD protection is not required as this panel contains final sub-circuit pump RCD protection. If an
upstream supply RCD is installed the correct operation of this panel could be comprimised.
• Electrical connection to the panel must be carried out in accordance with ‘Connection Instructions’, see page 3.
• Additions or midifications to the control panel are not permitted and will void warranty.
• The controller is not intended for use by children or inform persons without supervision.
• Repairs to the controller must only be carried out by a suitably qualified electrician.
