background image

MT3100 4 08/03/18

MT3100 1" IMPACT WRENCH

WARRANTY

Matco warrants this air tool for a period of 1 year to the consumer. 

We will repair any MT Series air tool covered under this warranty 

which proves to be defective in material or workmanship during 

the warranty period. In order to have your tool repaired, return 

the tool to any of the Matco Authorized Warranty Centers listed, 

freight prepaid. Please include a copy of your proof of purchase 

and a brief description of the problem. The tool will be inspected 

and if any part or parts are found to be defective in material 

or workmanship, the tool will be repaired free of charge and 

returned to you freight prepaid.
This warranty gives you specific rights. You may also have other 

rights which vary from state to state.
The foregoing obligation is Matco’s sole liability under this or any 

implied warranty and under no circumstances shall Matco be 

liable for any incidental or consequential damages.

Note:

 Some states do not allow the exclusion or limitation of 

incidental or consequential damages so the above limitation or 

exclusion may not apply to you.

NATIONAL MACHINE GROUP EAST

AIR TOOL REPAIR CENTER

1330 Commerce Dr.

Stow, OH 44224

(330) 688-6494

NATIONAL MACHINE GROUP WEST

AIR TOOL REPAIR CENTER

2223 S. Wilson Street

Tempe, AZ 85282

(480) 966-1097

HT PNEUMATIC REBUILDERS

22 Goodmark Place Unit #8

Toronto, ON M9w 6R2

(416) 213-0172

 

 

Summary of Contents for MT3100














Reviews: