Matco Tools MT2842A Manual Download Page 1

MT2842A 1  12/10/13

Some dust created by power sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to cause cancer, birth defects or 

other reproductive harm. Some examples of these chemicals are:
  •  lead from lead-based paints,
  •  crystalline silica from bricks and cement and other masonry products, and
  •  arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type 

of work. To reduce your exposure to these chemicals: work in a well ventilated 

area, and work with approved safety equipment, such as those dust masks that are 

specially designed to filter out microscopic particles.

• Operating Instructions 
• Warning Information 
• Parts Breakdown

Copyright © Professional Tool Products, 2013

All rights reserved

MT2842A

WARNING

WARNING

MAXIMUM RPM OF 275
MAX AIR PRESSURE:  

90 PSIG, 6.2 BAR
RATED RPM OF THE ACCESSORY USED 

MUST EXCEED THE MAXIMUM TOOL 

RPM SHOWN

ALWAYS READ 

INSTRUCTIONS BEFORE 

USING POWER TOOLS

ALWAYS WEAR 

SAFETY GOGGLES

WEAR HEARING 

PROTECTION

AVOID PROLONGED 

EXPOSURE TO 

VIBRATION

S P E C I F I C A T I O N S

 MT2842A

 

Square Drive . . . . . . .   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8"
Max. Torque . . . . .  . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . .35 ft. lbs.
Working Torque .   . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . .5-30 ft. lbs.
Max. Free Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . .275 RPM
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . .1.2 lbs.
Overall Length . . . . . . . . . .   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.9"
Air Consumption . . . . . . . . .    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.2 CFM
Sound Pressure Level . . . . . .  . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . .86 dBA
Recom. Air Pressure . . . . . .  . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . .90 PSI
Min. Hose Size . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . .3/8" ID
Air Inlet . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4" NPT

MINI TRINQUETE BAMBOLEANTE ENCAJE 3/8"  

DRIVE WOBBLE

MINI AIR

RATCHET

3/8"

Summary of Contents for MT2842A








Reviews: