![background image](http://html1.mh-extra.com/html/matco-tools/mt1718/mt1718_operating-instructions-warning-information-parts-breakdown_1739532001.webp)
MT1718
1
Rev. 01/13/05
MT1718
Super Duty
Long Barrel
Air Hammer
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
MT1718
Blows Per Minute . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,200 BPM
Bore Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4"
Piston Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3/4"
Air Inlet Thread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT
Air Hose Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" ID
Average Air Consumption. . . . . . . . . . . . . . . . . . . . . . . . . 4 CFM
Recommended Air Pressure . . . . . . . . . . . . . . . 90 PSIG (6.2 BAR)
Sound Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 dBA
Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.63"
Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.66 LBS.
S P E C I F I C A T I O N S
• Operating Instructions • Warning Information
• Parts Breakdown
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
• MAXIMUM BPM OF 2,200
• MAX AIR PRESSURE: 90 PSIG,
6.2 BAR
• BPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
MT1718_OpMan011305.indd 1
1/13/05 3:36:30 PM