INTRODUCTION
The MBT400 Wireless Micro LCD tests all 6V, 8V, 12V lead acid batteries individually or in parallel and 24V HD (series) battery
packs. The tester will display the battery or battery pack condition as % available capacity, rated capacity (i.e.
CCA’s), state of
charge voltage and good, marginal or replace status. The Wireless Micro LCD also tests 6V,12V, 24V and 36V starter and
charging systems including starter draw, alternator output (loaded/unloaded), and diode ripple. The Wireless Micro LCD features
both a Radio and an IR wireless printer output for remote printout of the test results. Test results can be sent to either an USB
Adapter (included) or stand alone IR Printer. The test data for the last test performed is stored in the memory and can be
reviewed either when connected to a battery, or when disconnected from the battery at a later time.
Features:
Patented conductance technology
Displays % of capacity and CCA’s.
Tests 6V,8V,12V & 24V (series) lead acid batteries including AGM and Gel
Includes Wireless Battery Module Transmitter
Radio and IR printer interface for remote printing
USB adapter for PC printing (included)
No conversion tables needed
Test batteries from 100 CCA to 3500 CCA (battery pack)
Tests 6/12/24/36V Starting/Charging Systems
Tests both series and parallel batteries
Tests Alternator Ripple
Bad cell is detected and displayed
Displays Multiple International Units
Tests 6V & 8V “golf cart” type batteries
Custom Header with Company Name, Date and Time
Loose lead detection
Temperature Compensation
RoHS compliant brass post adapters included
Multiple language (English, Spanish, French, German, Italian & Dutch)
Reverse polarity protection
Auto shutoff feature
Tests parasitic drain
Made in USA
.
1
MBT400 Controls
Press TEST for testing options
ON/OFF
Press SETUP to view setup options
Graphic LCD display:
Prompt symbols: + (UP/NEXT)
- (DOWN/BACK)
(ENTER)
Press VIEW or PRINT
Radio and IR Interface
Press to scroll UP, DOWN, LEFT, RIGHT or ENTER
Battery Module
Battery Module will power on
and automatically begin
transmitting data when
connected to battery.
Shows steady on
when connecting to
remote
When blinking data is
sending or receiving
to/from remote
Low Battery
