MATCO TOOLS MAXTPMS 2.0 - User Guide
UM-MDMAX-MA2-01
User manual
MATCO TOOLS MAXTPMS 2.0
Page 40/47
MISCELLANEOUS
1. CHARGE
Low Battery Indication
Your
TPMS TOOL
incorporates a low
battery detection circuit. Battery life is an
average of 300 sensor tests per battery
charge (approximately 60 to 80 vehicles)
this may change depending on the
sensor model.
Battery indicator status:
0%
25%
50%
75%
100%
When 0% is flashing, the tool will turn off after 10
seconds.
The battery is charging.
There is an issue with the battery -
please contact after sales service.
DO NOT
use the tool with low battery status because the transmission and emission may
not be reliable.
Universal power supply for charging
USB cable for charging and updating
When the battery is low, the “battery status” appears every 10 seconds. This display will
stop when the battery gains power.
Plug the USB cable between the tool and the charger adapter, and then plug the charger
adapter into an appropriate outlet. The battery icon will change to
Battery replacement
The tool must be returned to the factory for battery replacement.
Opening the tool or tampering with the seal placed on the tool, if broken, will void the
warranty
USB power
supply connector
