background image

 

I

MDMAXLITEA

    WARNING    

 

1.   Always perform automotive testing in a safe environment.
2.   Do not connect or disconnect any test equipment while 

the ignition is on or the engine is running.

3.   DO NOT attempt to operate the tool while driving the 

vehicle. Have second personal operate the tool. Any 

distraction may cause an accident.

4.   Before starting the engine, put the gear lever in the 

Neutral position (for manual transmission) or in the Park 

(for automatic transmission) position to avoid injury.

5.   NEVER smoke or allow a spark or flame in vicinity of 

battery or engine. Do not operate the tool in explosive 

atmospheres, such as in the presence of flammable 

liquids, gases, or heavy dust. 

6.   Keep a fire extinguisher suitable for gasoline/chemical/

electrical fires nearby.

7.   Wear an ANSI-approved eye shield when testing or 

repairing vehicles.

8.   Put blocks in front of the drive wheels and never leave 

the vehicle unattended while testing.

9.   Use extreme caution when working around the ignition 

coil, distributor cap, ignition wires and spark plugs. These 

components create hazardous voltage when the engine 

is running.

10.  To avoid damaging the tool or generating false data, 

please make sure the vehicle battery is fully charged and 

the connection to the vehicle DLC (Data Link Connector) 

is clear and secure.

11.  Automotive batteries contain sulfuric acid that is harmful 

to skin. In operation, direct contact with the automotive 

batteries should be avoided. Keep the ignition sources 

away from the battery at all times.

12.  Keep the tool dry, clean, free from oil, water or grease. 

Use a mild detergent on a clean cloth to clear the outside 

of the equipment when necessary.

13.  Keep clothing, hair, hands, tools, test equipment, etc. 

away from all moving or hot engine parts.

14.  Store the tool and accessories in a locked area out of the 

reach of children.

15. Do not use the tool while standing in water. 
16. Do not expose the tool or power adapter to rain or wet 

conditions. Water entering the tool or power adapter 

increases the risk of electric shock.

17.  When an engine is operating, keep the service area well-

ventilated  or attach a building exhaust removal system 

to the engine exhaust system. Engines produce various 

poisonous compounds (hydrocarbon, carbon monoxide, 

nitrogen oxides, etc.) that cause slower reaction time and 

result in death or serious personal injury.

Summary of Contents for MaxLiteA


























Reviews: