Step 6
Select connector provided.
(Suitable for RG6 or semi airspaced cable)
Place “F” connector on back to front and twist to
ensure that all braid is flat. See diagram.
(For other cable types
you will need to purchase
the corresponding connector)
Step 8
Attach U bolt and mast
clamp as per diagram.
Step 9
Attach antenna to mast and point to
transmitter as per diagram. Rotate antenna
to achieve best results.
Attach cable with cable tie near u-bolt
and attach cable to mast with UV grade
insulation tape or UV grade cable ties to
support cable weight and avoid damage to
connection from wind whipping cable from
side to side.
For any technical enquiries, please call Matchmaster TV Reception Systems on
Toll Free Aust: 1800-AERIAL (1800-237425) or Toll Free NZ: 0800-AERIAL (0800-237425)
To Transmitter
Step 7
Then insert cable into rear of connector and twist connector
clockwise until dielectric is flush with the bottom nut as
in diagram. Ensure that 2-3mm of centre core conductor
protrudes past the nut.
Plastic Outer Case
Metal Braid
Dielectric
Metal Sheath
Knurled Surface
Core
Conductor
