F. Recording Setting
Note:
The kit is set in the default to record
24hours/7days, you may change this default
to other time s and days.
Recording Modes Include:
Timing recording, motion detection
recording, manual recording and four types
of alarm recording. Each type has a different
recording mode and shows separate
indicator icons with various colours on the
top right. Right-click anywhere of the screen
> “Main Menu” > “Record Setup” > “Record
Plan”.
Motion Detection Video Recording:
Select
“Channel Setup” > “Video Detection” > It will
trigger when “Detection” type be modi
fi
ed
to “motion”, then check “Buzzer”, “Alarm”,
“Email Notice” etc. according the demand.
Manual Record:
24/7 video recording and
recording time can’t be changed. Right-click
> toolbar > “Manual Record”.
G. Video Playback
Toolbar > “Video Playback” > select
“Channel” > select “Record mode” > select
“Search time” > click “Search”, click time
bar to select the time point you want > click
“Playback” to see the recording
fi
le.
Playback button:
Playback previous video,
Playback next video,
Play,
Pause,
Fast “x2”, “x4”, “x8”.
H. Video Backup
Note:
Where the WNVR has only one USB
port there are two options to backup video.
1. Use a USB hub into the WNVR allowing
both the mouse and a USB
fl
ash drive
2. Use network access via the management
port of the WNVR through the software
CMS (Refer K). Example using a local
fl
ash drive for video backup.
I. Network Settings
Accessing the WNVR through the LAN
network can be achieved with a PC and
IE browser. The WNVR must be setup to
support this access.
GOTO Toolbar > Main Menu > Network
Setting to IP address. If you are not familiar
with network setting, click DHCP as
indicated in diagram below.
Where the user is familiar with network
settings and network environments manually
con
fi
gure the network parameters to
operate with the premises LAN network.
Success is identi
fi
ed when (Online) is
indicated.
Chapter 3 Remote Access
J. Mobile Access
Download Mobile App
Method 1:
Open the setup wizard, it shows
three QR codes, now scan the corresponding
QR code for Android and iPhone to
download and install mobile app;
Or enter “Main Menu” > “System Admin” >
“System Version” to scan corresponding QR
code to download and install mobile app;
Method 2:
Search “AVEYE” in Google Play
to download for android device; Search
“AVEYE” in App Store to download for iOS
device.
Add WNVR Device by Mobile App
After installing
the mobile app,
launch it and
begin the once
only registration
process. Please
click on register
and follow the
registration
process.
