background image

AU SUPPORT  1800 237 425  WWW.MATCHMASTER.COM.AU    |    NZ SUPPORT  0800 237 425  WWW.MATCHMASTER.CO.NZ  PAGE    |   1 OF 3

34MM-2K50-3

INSTRUCTION MANUAL

AFTER-SALES SERVICE

INTRODUCTION

FEATURE

PACKAGE LIST

PANEL DESCRIPTION

STATEMENT

SAFETY WARNING

Read this user manual carefully before using the product. 
Pictures shown in this manual is for reference only, different 
model and specifications are subject to real product. 
This manual is for operation instruction only, not for any 
maintenance usage. The functions described in this version 
are updated till March 30, 2020. In the constant effort to 
improve our product, we reserve the right to make functions 
or parameters changes without notice or obligation. Please 
refer to the dealers for the latest details.

Splitter Front Panel

We provide limited warranty for the product  
within 

three years

.

Thanks very much for purchasing this HDMI 1x4 Splitter KIT! 
This device accepts a single HDMI input and splits it into 
three RJ45 outputs and one HDMI output. It supports video 
resolutions up to 1080p@60Hz and all HDMI audio formats. 
It can extend 1080p signals on each output to up to 164 feet 
(50 meters) over a single CAT6a Ethernet cable. It supports 
the Power over Cable (PoC) feature, which allows the 
included receivers to be powered from the splitter over the 
Ethernet cables. It also supports bidirectional IR.

Please read this entire manual before using this device, 
paying extra attention to these safety warnings and 
guidelines. Please keep this manual in a safe place for  
future reference.
• 

Do not expose this device to water or moisture of 
any kind. Do not place drinks or other containers with 
moisture on or near the device. If moisture does get in 
or on the device, immediately unplug it from the power 
outlet and allow it to fully dry before reapplying power.

• 

Do not touch the device, the power cord, or any other 
connected cables with wet hands.

• 

Do not expose this device to excessively high 
temperatures. Do not place it in, on, or near heat 
sources, such as a fireplace, stove, radiator, etc. Do not 
leave it in direct sunlight.

• 

Prior to operation, check the unit and power cord for 
physical damage. Do not use if physical damage  
has occurred.

• 

Unplug this device from the power source when  
not in use.

• 

Take care to prevent damage to the power cord. Do 
not allow it to become crimped, pinched, walked on, or 
become tangled with other cords. Ensure that the power 
cord does not present a tripping hazard.

• 

Never unplug the unit by pulling on the power cord. 
Always grasp the connector head or adapter body.

• 

Ensure that power is turned off and disconnected before 
making any electrical connections.

• 

Clean using a soft, dry cloth only. Do not use chemical 
cleaners, solvents, or detergents. For stubborn deposits, 
moisten the cloth with warm water.

• 

This device has no user serviceable parts. Do not 
attempt to open, service, or modify this device.

• 

Splits a single HDMI input to three RJ45 outputs.

• 

Supports video resolutions up to 1080p@60Hz.

• 

Extends 1080p signals on each output to distances up to 
164 feet (50 meters) over a single CAT6 cable.

• 

Supports the Power over Cable (PoC) feature, allowing 
the receivers to be powered by the splitter over the 
Ethernet cables.

• 

1 by 3 IR matrix with receivers, bidirectional IR control 
for flexible control.

• 

Smart EDID management. Features DIP switch to select 
the output resolution 720p or 1080p to match the 
connected displays.

• 

Fully compliant with the HDMI 1.4 and HDCP  
1.4 specification.

Please make sure all the items listed below are in the 
package. If anything is missing or damaged, please contact 
your distributor for a replacement.
• 

1x splitter

• 

3x receiver 

• 

1x IR transmitter

• 

3x IR receiver 

• 

1x power supply 

1 2 3

4

No.

Name

Description

1

Power LED

The LED illuminates red when power 
is applied.

2

Input LED

The LED illuminates blue when there is 
an input source present.

3

Output LED

The LED Illuminates blue when there is 
HDMI output

4

EDID

DIP switch for setting the Extended 
Display Identification Data  
(EDID) value.

OUT 1

OUT 2

OUT 3

OUT 4

SOURCE

IR IN

IR OUT

DC 12V

1

2

3

4 5 6

Splitter Rear Panel

Reviews: