Connecting the Eye Emitter
You can connect the supplied Eye Emitter cord when you need
to place the receiver next to your audio/video equipment
instead of in front of it .
1. Insert the Eye Emitter cord plug into the receiver IR output
jack on the back of the receiver.
2. Position the Emitter bulb facing your audio/video equipment’s
IR sensor.
3. Remove the adhesive tape on the bottom of the bulb and stick
it on front of the audio/video equipment sensor.
4. Recommendation for best position is in the center of
receiving window of audio/video. Normally, the receiving window
is square or round shape in a glass/plastic plate.
Eye Emitters (length: 1.8 meters)
You will have one eye emitter with 1 eye, 2eyes, or 3eyes.
Please refer to the pictures below.
1) 1 eye:TV or Cable or Satellite etc
2) 2 eyes: TV, Cable or Satellite etc
3) 3 eyes: TV, Cable or Satellite, Audio etc
