10
Connection and configuration
Connection of the MS 83C-BMW.1
Installation of the crossover network
Connect the wiring cables that you already plugged into the tweeters with the crossover network. Proceed
with the cables for the woofers and the adapter cables (which are equipped with matching genuine
connectors) to the radio head unit in the same way. Carefully check for the right polarity of each single
connection. Then you have to fix the crossover network to the door panels or the door metal sheets, e.g.
by using some strong, double-sided adhesive tape or hot glue. Make sure that you choose an appropriate
position for the crossover network itself so that it does not collide with any part of the door structure when
you reassemble the door panel. Never mount the crossover network directly inside the door where the
window mechanism is placed. Fix the cables from the crossover network to the speakers with some tape
to either the door panels or the metal sheets in order to avoid undesired rattle noise.
Test run and reinstallation of the door panels
Befo
re you mount the door panels we strongly recommend that you do a test run first. Turn on your car
radio and check whether all speakers are working properly. If it is the case then you can finally reassem
-
ble the door panel.
MS 6B-VW.1
MS 1T-VW.1