Limited Warranty:
Matala will repair or replace for the original user any portion of a new MEA Pro Mini 2000 (excluding
replacement air diaphragm cartridges) which proves defective due to materials or workmanship
within 1 year of purchase date. Proof of purchase required. Contact the nearest authorized dealer for
warranty service.
Matala shall possess the sole right to determine whether to repair or replace defective equipment,
parts or components.
When the air pump is losing air pressure, it is recommended to replace the air diaphragm and can be
obtained from an Authorized Distributor.
THIS WARRANTY DOES NOT COVER DAMAGE DUE TO LIGHTNING OR OTHER CONDITIONS
BEYOND THE CONTROL OF Mini Air Pump.
THE WARRANTY WILL NOT APPLY:
(a) to defects or malfunctions resulting from failure to properly install, operate, or maintain the unit in
accordance with printed instructions provided.
(b) to failures resulting from abuse, accident, or negligence.
(c) to normal maintenance services and the parts used in connection with such service. Such as air
diaphragm cartridges.
(d) to units which are not installed in accordance with applicable local codes, ordinances, and good
trade practices.
(e) if unit is used for purposes other than for what it was designed and manufactured for.
(f) if unit or components have been tampered with or modified in any way by an unauthorized dealer
or repair shop.
WARRANTY:
Pond Aeration is now easier than ever !
MEA Pro Mini 2000
SPECIFICATIONS
Mini Aeration System
MEA Pro Mini 2000
Max flow
(cfm) / (lpm)
0.34 / 9.5
Rated voltage
(V)
110~120V
Power supply frequency
(Hz)
50 / 60
Closed pressure
(psi) / (bar)
3.1 / 0.21
Power
(W)
6W
Outlet
2 ways
Maximum air depth
8.5ft
Suggested pond size
Up to 2,000 gallons
EPDM membrane diffuser discs
MD-3W (3.5") x2 pcs
Air hose
Ø
ID5/32inchx30ftx2rolls /
ØID4mmx9m
x2rolls
Check valve
2 pcs
Mini air pump dimensions:
LxWxH
(inch) / (mm)
5.9x3.5x2.4 inch / 148x90x65 mm
G.W.
(lbs) / (kg)
4.4 / 2.0
* The above specification are subject to change without prior notice.
Item
Specification
-2-
Air Diaphragm Cartridge Replacement
• The MEA Mini Air uses an Air Diaphragm Cartridge that can be easily
replaced in the event of wear or tear.
If you notice that yours is losing air pressure, or time to 6 to 12 months,
it may be time to replace the Air Diaphragm Cartridge.
• Always unplug pump before inspecting or servicing.
• Remove screws located at the bottom of the Air Pump and remove
pump cover.
• Remove the Air Diaphragm Cartridge by removing the screws securing the cartridge to the base
of the pump.
Install the new Air Diaphragm Cartridge and secure it back into place with the screws.
Reinstall the pump cover and secure back into place with screws.
NOTE: On the MEA Pro Mini 2000 Model – Installing the cover of the pump will press the Air
Diaphragm Cartridge into its final seated position.
