manualshive.com logo in svg

Matador Radiant, Instruction Manual, Page: 27 / 32

Share
Download
Matador Radiant Instruction Manual Download Page 27

 27

MATADOR INSTRUCTION MANUAL

Warranty

MATADOR WARRANTY*

Thank you for purchasing one of our quality Matador BBQs.

YOUR MATADOR BBQ IS COVERED AGAINST BURN THROUGH AND RUST THROUGH OF THE FIRE BOWL 
AND LID FOR A PERIOD OF 10 YEARS, FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT.
THIS WARRANTY EXCLUDES SURFACE RUST AND DAMAGE CAUSED BY ABUSE AND NEGLECT.

ALL PLASTIC PARTS ARE WARRANTED FOR A PERIOD OF 5 YEARS, FOR PARTS AND LABOUR REPAIR OR 
REPLACEMENT. THIS WARRANTY EXCLUDES FADING AND DISCOLOURATION, AND DAMAGE CAUSED BY 
ABUSE OR NEGLECT.

ALL OTHER PARTS ARE WARRANTED FOR A PERIOD OF 2 YEARS, FOR PARTS AND LABOUR REPAIR OR 
REPLACEMENT. THIS WARRANTY EXCLUDES DAMAGE CAUSED BY ABUSE OR NEGLECT.

CONDITIONS OF THE WARRANTY

•  The BBQ must be operated and maintained in accordance with the instructions supplied in the                   

operating manual.

•  Any repair does not extend the warranty period.
•  Any parts other than original Matador parts will void this warranty.

THIS WARRANTY IS GIVEN BY:

Mayo Hardware Pty Ltd
ABN 73 000 032 806
4 Secombe Place
Moorebank 
NSW 2170 
Australia
www.mayohardware.com.au

Phone (Aus) 1300 360 211
Phone (NZ) 09 416 6240
Email: matador@mayohardware.com.au  

REGISTERING YOUR BBQ FOR WARRANTY

We recommend you register your Matador BBQ for potential warranty claims. 
Record the below information and email a copy of the details together with a copy of your purchase receipt to 
matador@mayohardware.com.au  

Summary of Contents for Radiant

































Reviews:

No comments