2
/
6
TUNER
There are two wing nuts on
the top of the tuner, which
are used to connect the
antenna and the ground
wire respectively.
There is an SO-239 socket
on the bottom of the tuner,
this socket is connected to
the coupler's "TUNER"
socket via a 50 ohm coaxial
cable.
Note: this coaxial cable is
not allowed to be split by
any device or component.
It has to be a simple coax
cable.
The tuner also has four
oval mounting holes for
fixing the tuner to a wall or
mast.
This tuner has a sturdy
case and excellent water
resistance. It can be used
outdoors. When installing
the tuner, please
waterproof the coaxial
cable connector to avoid
short circuit.
COUPLER
mAT-50-Y for Yaesu transmitter.
If you want tuner to work with a Yaesu
transmitter, choose this coupler. Coupler comes with a cable mAT- CY.
mAT-50-M for ICOM&KENWOOD transmitter
: If you want tuner to work
with an ICOM transmitter, choose this coupler. Coupler comes with a cable
mAT-CI. If you want the tuner to work with a KENWOOD transmitter, also
