mastro GLB0035, Operating Instructions Manual, Page: 8 / 14

INSTRUCTION MANUAL FOR DISHWASHERS
Page 7 of 13
GB
4.6 Discharging the Appliance
4.6.1 Models without discharging pump
1. Turn off the appliance as described in the “Turning off
the Appliance” paragraph, above.
2. Remove the overflow cap: wait until the tank is
completely empty.
4.6.2 Models with discharging pump
1. Turn off the appliance as described in the “Turning off
the Appliance” paragraph, above.
2. Remove the overflow cap and shut the door.
3. Push the “discharging pump” button shown, and
release it once the tank is completely empty.
START
4. On models without the “discharging pump button”,
turn off the appliance as described in the “Turning off
the Appliance” paragraph, above.
5. Remove the overflow cap and shut the door.
6. Press the “start” button, shown, and release it once
the tank is completely empty.
•
With the tank completely empty, clean the appliance as described in the “Maintenance”
paragraph.
•
Turn off the appliance whenever the overflow cap is removed.
4.7 Regenerating the Ion Exchange Resins
If the machine is equipped with an internal softener (available on request), in order to ensure its
correct performance, it is necessary to periodically regenerate the ion exchange resins. The number
of cycles between each regeneration is set by the hardness of the water, according to the following
table.
dH F
No. of
Cycles
dH F
No. of
Cycles
dH F
No. of
Cycles
dH F
No. of
Cycles
6,0 10 150 9,5 17 74 13,5 24 53 17,5 31 32
6,5 11 138 10,0 18 71 14,0 25 50 18,0 32 29
7,0 12 126 10,5 19 68 14,5 26 47 18,5 33 26
7,5 13 114 11,0 20 65 15,0 27 44 19,0 34 23
8,0 14 100 12,0 21 62 15,5 28 41 19,5 35 20
8,5 15 90 12,5 22 59 16,0 29 38
9,0 16 77 13,0 23 56 17,0 30 35
•
It is suggested to carry out the regeneration during breaks.
•
Turn off the appliance as indicated in paragraph “Turning off the appliance”.
•
Drain the appliance as indicated in paragraph “Discharging the appliance”.
•
Clean the dishwasher as directed in chapter “Maintenance”. At the end of the cleaning
procedure, open the main water tap and engage the main electrical switch.