Masterzen PRM 180, Instruction Manual, Page: 43 / 50

User Manual
Συντηρητές Κρασιών XPR
1. Knife 2. Decorative nail 3. Cross screwdriver
4. Door shaft screw 5. Upper door hinge 6. M5 six angle screwdriver
7. Lower door hinge
Remark: Before operate the reversibility, need to power off at first, and need to cooperate
with two people!
1. Open the to the maximum angle, pry out the four decorative nails(2) on the left side of
the box with a medium knife(1) and put them aside for standby. Note: don't hurt your hands
(see Figure 1).
2. Open the door, screw off Door shaft screws(4) on the upper (5)and lower(7) door hinges
with a cross screwdriver(3), and remove the door body for standby (see Figure 2).
3. Use an M5 six angle screwdriver(6) to screw off the Allen screws on the right upper hinge
(5)and lower hinge(7), and install them on the left side of the box after they are adjusted.
(see Fig. 3)
4. Rotate the removed door 180 degrees, align the upper and lower ends directly with the
door hinge hole on the left side of the box, adjust the door body, tighten the upper and
lower screws(4) with a cross screwdriver, and install the removed Decorative nail(2) to the
right to complete the door body replacement (see Figure 4 & Figure 5).