Mastervolt EASY CHARGE 6 A User Manual Download Page 3

EN / EasyCharge 6 and 10 Amp - User’s Manual

3

 

 

 

SPECIFICATIONS 

 

TECHNICAL SPECIFICATIONS 

 

Model 

EasyCharge 6A-1 

EasyCharge 10A-2 

Article number: 

43310600–Europlug (CEE 7/7) 
43310602–UK-plug (BS1363 type G) 

43321000–Europlug (CEE 7/7) 
43321002–UK-plug (BS1363 type G) 

Input voltage: 

120/230 V (90-265 V), 50/60 Hz 

120/230 V (90-265 V), 50/60 Hz 

Max. AC input current 

2A 

2.5A 

Protection class: 

Class I 

Class I 

Number of outputs: 

Maximum charge current: 

6 Amp 

10 Amp @ 12V / 5 Amp @ 24V 

Fuse rating DC cables: 

10 Amp 

10 Amp 

Nominal battery voltage: 

12V 

12V / 24V (see INSTALLATION) 

Charge voltage (per output) 

 

 - Absorption: 

14.3V (± 0.2V) 

14.3V (± 0.2V) 

 - Float: 

13.3V (± 0.2V) 

13.3V (± 0.2V) 

Charge characteristic*: 

Regeneration, Bulk, Absorption, Float, Maintenance 

Recommended battery** 

 

 

 - BCI group size: 

Group 24 through 31 

Group 24 through 31 

 - battery capacity: 

20 – 120 Ah 

35 – 120 Ah 

Battery types**: 

Any 12V lead acid battery (Flooded / Gel / AGM / Spiral ) 

Dimensions (L x W x D): 

89 x 163 x 63 mm  
(3.5 x 6.4 x 2.5 inch) 

140 x 198 x 63 mm  
(5.5 x 7.8 x 2.5 inch) 

Weight (excl. cabling): 

1.8 kg (4.0 Lbs) 

2.5 kg (5.6 Lbs) 

Protection degree (casing) 

IP68 

IP68 

Ambient temperature: 

–20°C to 50°C (–4°F to 122°F) 

–20°C to 50°C (–4°F to 122°F) 

Protections: 

Spark free, Short circuit, Reversed polarity, over voltage, current limited, over 
temperature 

Conformity: 

California Energy Commission (CEC) standards for Small Battery Charger Systems 
EU directives: 2006/95/EC (LVD), 2004/108/EC (EMC), 2011/65/EU (RoHS) 

 
* See section THEORY OF OPERATION  
** Always follow the instructions published by the battery manufacturer 

 

WARRANTY SPECIFICATIONS   

Mastervolt assures the proper operation of this 
product for the duration of two (2) years, under the 
condition that the product is installed and used 
according to the instructions in this manual. 
Installation or use not according to these instructions 
may result in under performance, damage or failure 
of the product and may void this warranty. The 
warranty is limited to the cost of repair and/or 
replacement of the product. Costs for labor or 
shipping are not covered by this warranty. 
 

DISPOSAL 

At the end of its useful life, do not dispose this 
product together with domestic waste. Drop it off at a 
collection center for recycling of electrical and 
electronic devices. Contact your supplier for 
recollection and recycling or contact an authorized 
waste management company 
 

 

 

Summary of Contents for EASY CHARGE 6 A









Reviews: