5
Care Instructions
Care and Maintenance of your MasterTop
®
Wind Stopper:
Your MasterTop Tonneau Cover is made of the finest materials available but to keep it looking new and for the maxi-
mum possible wear, it will need periodic cleaning and basic maintenance. The main threat to your Tonneau is pollu-
tants, dirt and grime. By keeping your soft top clean you will prolong the life of your top.
We recommend the following to keep your top like new:
Washing:
The curtain fabric should be washed often using a mild soap, warm water and a soft bristle brush. You can also use
special soft top cleaners available on our Distributors websites. Make sure that after cleaning you rinse with clear
water to remove all traces of soap to avoid residue. Air Dry. Do not put in dryer.
Water/Fabric:
In the event of seeping through the seams, 3M Scotchgard
®
may be applied on the inside of the seams to stop the
seeping. Rips in the fabric may be repaired with Bondex
®
iron on patches. Iron the patches to the Inside of the top,
carefully following the Bondex
®
instructions.
Windows:
It is very important that you keep your Wind Stopper windows clean! Use a mild soap and water solution to gently
clean your windows. NEVER wipe your windows clean with a dry cloth! Dust and dirt on a dry cloth can scratch your
windows causing “fogging” and permanent damage. When removing your windows, store them with a towel or in a
Soft Touch Window Roll from MasterTop between the panels/rear windows to protect them from damage. If frost or
ice forms on the outside of your windows during the winter, DO NOT use an ice scraper to remove this frost. Over
time you will see small micro scratches in your windows which are natural wear and tear. These Micro scratches can
be “polished” out using the window polish available at your MasterTop Distributor.
Zippers:
Keeping the zipper cleaned and lubricated with a silicone lubricant
(available online) will help prevent damage and keep the zippers in
a smooth working condition. If zipper opens behind the slider, the
slider may have been spread apart. This problem can usually be
fixed by using an ordinary pair of pliers to bring the sides back into
parallel. Return slider to the end of the zipper in the normal Open
position. Squeeze lightly at first and test zipper. If the zipper contin-
ues to remain open squeeze more firmly with pliers and try the zip-
per again. Repeat procedure until your zipper operates correctly.
For more information on MasterTop:
This and other helpful product information is available on
www.mastertop.com
Please visit our website frequently for product updates and exciting news.
Bimini Top, Wind Stopper
and Tonneau Combination
shown for earlier triangle
style roll bar shown
Normal Slider:
Jaws parallel
Damaged Slider:
Jaws Spread
Use pliers to squeeze
jaws back to parallel.
Tonneau
Bimini Top
Wind
Stopper
MT_YJ_WIND_S_INST_LTR_6.qxp_Layout 1 8/9/17 11:03 AM Page 5
08092017110419