MasterSounds UNION AUDIO FX, Operation Manual

Page: 8 / 12

FX
Operation Manual Rear panel controls 8
Each MasterSounds FX is supplied with four quality TRS jack leads. These
are for connecting to your MasterSounds DJ mixer, and back into the FX.
To set up your FX unit simply follow the
instructions below:
Insert two of the supplied TRS jack leads to the AUX OUT on the rear of
your MasterSounds DJ mixer: L for the left channel and R for the right
channel. Then connect the leads to the corresponding L & R on the AUX
RETURN of the FX unit.
Once you have connected the AUX RETURN, insert two of the supplied TRS
jack leads to the AUX RETURN/INSERT on the rear of your MasterSounds DJ
mixer, once again L for the left channel and R for the right channel.
Then connect the leads to the corresponding L & R on the INSERT of the
FX unit.
Press the INSERT ON button on the rear of your MasterSounds DJ mixer,
Plug in the FX unit’s supplied power supply and attach to the mains.
The FX unit doesn’t have an on/off switch.
4: Rear panel controls