EU Declaration of Conformity
Applicant: Luceco PLC
Address: Luceco Distribution Centre, Stafford Park 1, Telford Shropshire, United Kingdom
(EU) Luceco SEC/Bobinadora 1-5 08302 Mataró SPAIN
Description: 13A Socket with Door Chime
Model: 322BELL, 822BELL
We (Luceco PLC) declare under our sole responsibility that the products above are inconformity with the essential requirements of the following:
Signed for and on behalf of: David Cleaver
Senior Product Manager
Place of Issue: Stafford Park 1,Telford Shropshire, United Kingdom
Date of Issue: 16/Mar/2020
Setup Door Chime
Chime Selection
Volume Selection
Radio Equipment Directive (RED)
2014/53/EU
Article 3.1(a) Health
EN62479:2010
EU Directives
Conformas to
2011/65/EU and its amendment
2015/863/EU(ROHS)
ROHS 2011/65/EU and its amendment
2015/863/EU
2009/125/EC ERP
ERP:
EN 50564:2011
Article 3.2 Radio:
EN 300 220-1 V3.1.1 (2017-02)
EN 300 220 2 V3.1.1 (2017-02)
Article 3.1(b) EMC:
Draft EN 301 489-1 V2.2.0 (2017-03)
EN 301 489-3 V2.1.1 (2019-03)
Article 3.1(a) Safety:
EN62368-1:2014+A11:2017
Chime Selection
Single press the chime button on the left of the door chime socket to filter through the six different options – 4 x ‘Ding-dong’ and 2 x ‘Westminster’
chimes.
Volume Selection
1. Single press the right side volume selection button to filter through the four different volumes settings. Options include – No sound, low, mid and
high volume.
2. The LED flasher will always flash for 10 seconds on each press of the button.
Pairing Additional Push Buttons & Door Chimes
Press and hold the chime button until the LED illuminates, then release. Push the button on the ‘Push Button’, once the door chime socket will ring,
then the units are paired. Repeat the process to pair additional push buttons to the door chime. (A maximum of 16 push buttons can be paired).
Reset Door Chime
Press and hold the chime button for 10 seconds or until you hear a triple ‘beep’ to reset the door chime. Maximum distance is based on an open area
environment. Any walls, doors or ceilings may reduce the operating range. Door chime is to be used indoors only.
Door Chime Not Working?
1. Ensure the battery in the push button is new.
2. Objects and materials, such as walls, doors, ceilings and furniture, are blocking the signal. Try moving the chime closer to the push button.
3. Wireless interference can be caused by external wireless devices, such as alarms and adaptors. It is recommend not to plug-in such devices in the
door chime socket, or have in the close vicinity.
4. Door chime and push button are not paired – please refer to the ‘Pairing Additional Push Buttons’ section.
5. Ensure wired connections are made good, MCB is on and power is being made to the socket.
This product belongs to receiver category 2
: Caution
Push Button
This product contains a coin/button cell battery and if ingested can cause severe chemical burns. If the battery has been ingested, please seek
medical advice immediately. In just 2 hours a digested battery can lead to death. Keep new and used batteries away from children. If the battery
compartment does not close securely, please stop using the product.
