13
OPERATION
PICTURE 13 PICTURE 14
THE RIP GUIDE PLACED ON THE WORKING TABLE HELPS ONLY WITH
RIP CUTTING
In order to make any diagonal cuts, position the stone against the rip guide as shown in
PICTURE 14.
2) Cutting 45
°
Miters:
This saw is designed with an adjustable Cutting Head for precision 45
º
Miter Cuts.
DO NOT FORCE THE TOOL. It will do the job better and safer at the rate
for which it was designed.
Before 45 degrees cutting, screw the bolt by hand and keep the upper Locking Sleeve to the
bottom position (see PICTURE 15).
Keep the cutting head at 90 degrees position; be sure the blot stopper touch the motor
bracket (see PICTURE 16). Put the stone on the cutting table and make sure that it is
properly positioned against the Aluminum Fence (see PICTURE 17).
PICTURE 15 PICTURE 16
