Accessories Available for your Opener
38
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Multi-Function door control:
1.
With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Multi-Function door control:
1. Choose a 4-digit password using numbers from 0 to 9
(a number can be used more than once, for example,
4, 0, 4, 1).
2. Press the four buttons for the password, then press
and
hold the Enter button. The indicator light on the
door opener panel will blink.
3. Press and release the “Smart” (learn) button on the
opener panel. After the opener lights flash, release
the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
Setting a Temporary Password
In addition to your personal entry password which works
at all times, a 4-digit temporary password can be added
for the convenience of visitors or service persons. This
allows authorized persons a way to gain temporary
access.
After a programmed number of hours or number of
accesses, this temporary password expires and will no
longer open the door. The temporary password can be
used to
close the door even after it has expired. To set a
temporary password:
1. Press the four buttons for your personal entry
password (not the last temporary password), then
press and hold the
✽
button.
The opener light will blink three times. Release the
button.
2. Press the temporary 4-digit password you have
chosen, then press Enter.
The opener light will blink four times.
3. To set the number of
hours this temporary password
will work, press the number of hours (up to 255), then
press
✽
.
OR
3. To set the number of
times this temporary password
will work, press the number of times (up to 255), then
press #.
The opener light will blink once when the temporary
password has been learned.
Test by pressing the four buttons for the temporary
password, then press Enter. The door should move. If
the temporary password was set to a certain number of
openings, remember that the test has used up one
opening.
To clear the temporary password, repeat steps 1-3,
setting the number of hours or times to 0 in step 3.
LOCK
LIGHT
953MM
7702CB
Extension Brackets:
(Optional) For safety sensor installation
onto the wall or floor.
To order call: 1-800-528-9096
Outside Quick Release:
Required for a garage with NO
access door.
8 foot Rail Extension Kit:
To allow an 8 foot door to open fully.
950MM
940MM
41A5281
935CB
7704CB
SECURITY
✚
Single Function
Remote Control:
Includes visor clip.
SECURITY
✚
Multi-Function
Remote Control:
Includes visor clip.
10 foot Rail Extension Kit:
To allow a 10 foot door to open fully.
8710CB
SECURITY
✚
Multi-Function Mini
Remote Control:
With key ring and Velcro fastening strip.
956MM
Motion Detecting Control Panel:
Multi-function door control with motion
sensor that automatically turns opener
lights on for 5 minutes when it detects a
person entering the garage. Sensor can
be easily deactivated when desired.
SECURITY
✚
Keyless Entry:
Enables homeowner to operate garage door opener from outside by
entering a password on a specially designed keyboard. Also can add a
temporary password for visitors or service persons. This temporary
password can be limited to a programmable number of hours or entries.