Page 10
5. MAINTENANCE INSTRUCTIONS
• After use and before performing main-
tenance, unplug and disconnect the
jump starter.
• Use a dry cloth to wipe all battery
corrosion and other dirt or oil from
the battery clips, cords and the jump
starter case.
• Ensure that all of the jump starter
components are in place and in good
working condition.
• All servicing should be performed by
qualified service personnel.
6. MOVING AND STORAGE INSTRUCTIONS
• Store inside, in a cool, dry place.
• Do not store the clips on the handle,
clipped together, on or around metal,
or clipped to cables. The clips on the
jump starter are live when the switch is
in the ON position and will produce arc-
ing or sparking if they come in contact
with each other. To prevent accidental
arcing, always place the switch in the
OFF position and keep the clips on the
storage holders when not using it to
jump start a vehicle.
• If the jump starter is moved around
the shop or transported to another
location, take care to avoid/prevent
damage to the cords, clips and jump
starter. Failure to do so could result in
personal injury or property damage.
IMPORTANT:
Do not use and/or store the
jump starter in or on any area or surface
where damage could occur if the internal
battery should unexpectedly leak acid.
IMPORTANT:
• CHARGE IMMEDIATELY AFTER
PURCHASE
• KEEP FULLY CHARGED
Charge the jump starter’s internal battery
immediately after purchase, after every
use and every 30 days.
All batteries are affected by tempera-
ture. The ideal storage temperature is
at 70°F. The internal battery will grad-
ually self-discharge (lose power) over
time, especially in warm environments.
Leaving the battery in a discharged
state may result in permanent battery
damage. To ensure satisfactory perfor-
mance and avoid permanent damage,
charge the internal battery every month.
7. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The jump starter won’t
jump start my car.
The Jump Start switch is
not turned ON.
The clamps are not
making a good connection
to the battery.
The jump starter’s battery
is not charged.
The vehicle’s battery is
defective.
Turn ON the Jump Start
switch.
Check for poor connection
to battery and frame.
Make sure connection
points are clean.
Check the battery charge
status by pressing the
Select
button on the front
of the unit. See Digital
Display section.
Have the battery checked.