MasterForce 260-9513 Operator'S Manual Download Page 15

125A Automatic Battery Charger & Engine Starter

WARRANTY

90-DAY MONEY BACK GUARANTEE

This MASTERFORCE™ brand battery charger carries our 90-Day Money Back 

Guarantee. If you are not completely satisfied with your MASTERFORCE™ 

brand product for any reason within ninety (90) days from the date of purchase, 

return the item with your original receipt to any MENARDS

®

 retail store, and we 

will provide you a refund – no questions asked.

3-YEAR LIMITED WARRANTY

This MASTERFORCE™ brand battery charger carries our famous No Hassle 

3-Year Limited Warranty to the original purchaser. If, during normal use, this MAS-

TERFORCE™ product breaks or fails due to a defect in material or workmanship 

within three (3) years from the date of original purchase, simply bring the item 

with the original sales receipt back to your nearest MENARDS

®

 retail store. At its 

discretion, MASTERFORCE™ agrees to have the item or any defective part(s) 

repaired or replaced with the same or similar MASTERFORCE™ product or part 

free of charge, within the stated warranty period, when returned by the original 

purchaser with original sales receipt. Not withstanding the foregoing, this limited 

warranty does not cover any damage that has resulted from abuse or misuse of 

the Merchandise. This warranty: (1) excludes expendable parts including but not 

limited to blades, brushes, belts, bits, light bulbs, and/or batteries; (2) shall be 

void if this product is used for commercial and/or rental purposes; and (3) does 

not cover any losses, injuries to persons/property or costs. This warranty does 

give you specific legal rights and you may have other rights, which vary from 

state to state. Be careful, battery chargers are dangerous if improperly used or 

maintained. Seller’s employees are not qualified to advise you on the use of this 

merchandise. Any oral representation(s) made will not be binding on seller or its 

employees. The rights under this limited warranty are to the original purchaser 

of the merchandise and may not be transferred to any subsequent owner. This 

limited warranty is in lieu of all warranties, expressed or implied including war-

ranties or merchantability and fitness for a particular purpose. Seller shall not be 

liable for any special, incidental, or consequential damages. The sole exclusive 

remedy against the seller will be for the replacement of any defects as provided 

herein, as long as the seller is willing or able to replace this product or is willing 

to refund the purchase price as provided above. For insurance purposes, seller 

is not allowed to demonstrate any of these products for you.

For questions/comments, technical assistance or repair parts—

Please call toll free at: 

1-800-621-5485.

Page 15 

1.  WARRANTY

Summary of Contents for 260-9513

















Reviews: