background image

2

3

TABLE OF CONTENTS

Specification……………..…………………………..………..…..……Page 2
Rules for Safe Operation…………………………………………….…Page 3 
Operation..………..………..………..………..………..………..………Page 7
Accessories..………..………..………..………..………..………...… Page 12
Maintenance..………..………..………..………..………..………..…Page 13
Exploded view and part list.............................................................................Page14
Warranty..………..………..………..………..………..………..…...…Page 16

SPECIFICATIONS

Motor:

120 V 60 Hz 2.6 A 

Speed:

9000 -13000 OPM (no load) 

Pad size:

5”

Pad type:

Hook and loop fastening system with 

8-holes 

Weight:

6 lb 14 oz (3.1 kg)

RULES FOR SAFE OPERATION

KNOW YOUR TOOL

Before operating this tool, carefully read this operating manual and all of 

the labels affixed to the random orbit sander. Keep this manual available for 

future reference.

IMPORTANT

This tool should only be serviced by a qualified service technician.

READ ALL INSTRUCTIONS THOROUGHLY 

GENERAL SAFETY RULES FOR ALL POWER TOOLS

WARNING:Read and understand all instructions. 

Failure to follow all in-

structions listed below may result in electric shock, fire and/or serious per-

sonal injury. 

WORK AREA

 

 

Keep the work area clean and well lit.

 Cluttered benches and dark areas 

invite accidents.

 

 

Do not operate power tools in an explosive environment

such as in the 

presence of flammable liquids, gases, or dust.

 Power tools create sparks 

which may ignite dust or fumes.

 

 

Keep bystanders, children, and visitors away while operating a power 

tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

 

  

Double insulated tools are equipped with a polarized plug (one blade is 

wider than the other.) This plug will fit in a polarized outlet only one way. 

If the plug does not fit fully in the outlet, reverse 

the plug. If it still does not fit, contact a qualified 

electrician to install a polarized outlet. Do not 

change the plug in any way. 

Double insulation 

eliminates the need for the three wire grounded 

power cord and grounded power supply system. 

 

  

Avoid body contact with grounded surfaces such 

as pipes, radiators, ranges and refrigerators. 

There is an increased risk of electric shock if your 

body is grounded.

120V

 ~  60

Hz

Summary of Contents for 241-0804










Reviews: