background image

Page 14

SAVE yOUR RECEIPTS

THIS WARRANTy IS VOID WITHOUT THEM

12 VOLT LITHIUM-ION RIGHT ANGLE DRILL

WARRANTy

90-DAy MONEy bACk GUARANTEE:

This MASTERFORCE

®

 brand power tool carries our 90-DAY Money Back 

 

Guarantee.  If you are not completely satisfied with your MASTERFORCE

®

 brand 

power tool for any reason within ninety (90) days from the date of purchase, return 
the tool with your original receipt to any MENARDS

®

 retail store, and we will provide 

you a refund – no questions asked.

3-yEAR LIMITED WARRANTy:  

This MASTERFORCE

®

 brand power tool carries our famous No Hassle 3-Year 

Limited Warranty to the original purchaser.  If, during normal use, this 
MASTERFORCE

®

 power tool breaks or fails due to a defect in material or 

workmanship within three (3) years from the date of original purchase, simply bring 
this tool with the original sales receipt back to your nearest MENARDS

®

 retail store. 

At its discretion, MASTERFORCE

®

 agrees to have the tool or any defective part(s) 

repaired or replaced with the same or similar MASTERFORCE

®

 product or part 

free of charge, within the stated warranty period, when returned by the original  
purchaser with original sales receipt. Not withstanding the foregoing, this limited 
warranty does not cover any damage that has resulted from abuse or misuse of 
the Merchandise. This warranty: (1) excludes expendable parts including but not 
limited to blades, brushes, belts, bits, light bulbs, and/or batteries; (2) shall be void 
if this tool is used for commercial and/or rental purposes; and (3) does not cover any
losses, injuries to persons/property or costs. This warranty does give you specific 
legal rights and you may have other rights, which vary from state to state. Be 
careful, tools are dangerous if improperly used or maintained. Seller’s employees 
are not qualified to advise you on the use of this Merchandise. Any oral 
representation(s) made will not be binding on seller or its employees.  The rights
under this limited warranty are to the original purchaser of the Merchandise and may 
not be transferred to any subsequent owner.  This limited warranty is in lieu of all 
warranties, expressed or implied including warranties or merchantability and fitness 
for a particular purpose.  Seller shall not be liable for any special, incidental, or 
consequential damages.  The sole exclusive remedy against the seller will be for the 
replacement of any defects as provided herein, as long as the seller is willing or 
able to replace this product or is willing to refund the purchase price as provided 
above.  For insurance purposes, seller is not allowed to demonstrate any of these 
power tools for you.
For questions / comments, technical assistance or repair parts – Please Call Toll 
Free at: 

1-866-917-4374

. (M-F 8am – 6pm EST)

Summary of Contents for 241-0315

















Reviews: