22
BATTERY PACk REMOVAL AND
PREPARATION FOR RECYCLING
To preserve natural resources,
please recycle or dispose of batteries
properly. This product contains
lithium-ion batteries. Local, state, or
federal laws may prohibit disposal of
lithium-ion batteries in ordinary trash.
Consult your local waste authority
for information regarding available
recycling and/or disposal options.
WARNING!
Upon removal of the battery pack for disposal or recycling, cover
the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble battery pack or remove any of its components. Lithium-
Ion batteries must be recycled or disposed of properly. Also, never touch both
terminals with metal objects and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these warnings could result in fire
and/or serious injury.
CHUCk REMOVAL (Fig. 14)
The chuck can be removed and replace by a new one.
Lock the trigger switch by placing the direction of rotation selector in
center position.
Open the chuck jaws. Using a screwdriver, remove the chuck screw by
turning it in a clockwise direction.
Insert a 5/16-in. or larger hex key into the chuck of the drill and tighten the
chuck jaws securely.
Tap the hex key sharply with a mallet in a clockwise direction. This will
loosen the chuck for easy removal.
NOTE:
The chuck screw has left handed threads.
Attach a new chuck to the spindle and tighten the chuck screw.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
The Driver does not
work
Battery is depleted
Charge the battery
Bit cannot be
installed
Sleeve is not released
Release the sleeve
Bit does not fit the sleeve Use suitable adapter
Motor overheating
Be sure cooling vents
are free from dust and
obstacles
Clean, clear vents. Do
not cover with hand
during operation
Mallet
Hex key
Jaws
Fig. 14
Summary of Contents for 241-0300
Page 24: ...24...