figure 26
•
ONE TOUCH: Push to automatically start the COOL function with the fan set to AUTO and the
temperature set to 80°F (26°C). TIMER function will be cancelled if set. (Not available on all
models.)
•
MODE: Press to select desired operation mode.
•
TEMP UP: Push this button to increase the indoor temperature setting.
•
FAN SPEED: Use to select the desired fan speed.
•
SLEEP: Press this button to activate the Sleep mode. This function is available on COOL or AUTO
mode only. For operation details, see SLEEP feature.
•
ENERgY SAVER: Press this button to activate the Energy saving mode and again to stop it. (Not
available on all models.)
BATTERY INSTALLATION
1.
Insert a coin into the groove on the battery cover, and turn clockwise 45 degrees. Make sure that the
groove is aligned with the “Unlock” sign and remove the battery cover (See Figure 26).
2.
Install Lithium battery (CR2025) into the remote control, with the positive (+) side up.
3.
Replace the battery cover, make sure the battery cover groove is aligned with the “Unlock” sign.
Insert a coin into the groove and press it gently, then turn counter clockwise 45 degrees. Make sure
the groove is aligned with the “Lock” sign.
WARNiNg
:
•
Battery must be disposed of properly. DO NOT short circuit or dispose of in the fire.
•
Keep batteries out of the reach of children.
•
DO NOT ingest, or allow others to ingest the battery.
•
Non-rechargeable batteries are not to be recharged.
•
Exhausted batteries are to be removed from the product.
Coin
Lock Sign
Unlock Sign
Battery Cover
groove
Coin
Lock Sign
Unlock Sign
Battery Cover
groove
16