21
CUTTING WARPED MATERIAL
(Fig. 15 and 16)
WARNING:
To avoid kickback and to avoid serious personal injury never
position the concave side of bowed or warped material against the fence.
When cutting warped material, be certain that the material to be cut is positioned on
the mitre table with the convex side against the fence, as shown (Fig. 15).
If the warped material is positioned the wrong way, (Fig. 16), it will pinch the blade
near the end of the cut.
MAINTENANCE
Before cleaning or performing any maintenance, make sure that the Mitre Saw has
been disconnected from the power supply. Keep all ventilation openings clean. Avoid
using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use. Use a
clean cloth to remove dirt, oil and grease.
WARNING:
Do not allow improper materials, such as brake fluids, gasoline,
petroleum-based products, penetrating oil, etc., to come in contact with plastic parts
as improper materials contain chemicals that can damage, weaken or destroy plastic.
WARNING:
To ensure safety and reliability, all repairs should be performed by
a qualified service technician.
Fig. 15
Fig. 16
Summary of Contents for 55-6898-8
Page 10: ...10 ...
Page 24: ...24 Exploded View ...
