ON/OFF Switch (Fig. 6)
1. To turn the thickness planer on, insert the safety
key (1) into the slot. Move the switch to the ON
(up) position.
2.
To turn the planer off, move the switch to the
OFF (down) position.
3.
To lock the switch in the OFF position, grasp the
safety key (1) and pull it out of the switch.
Reset Button (Fig. 6)
In the event of an overload, the thickness planer is
equipped with an overload circuit.
If the planer experiences an overload:
1. Turn the ON/OFF switch to the OFF position.
2. Unplug the power cord from the power source.
3. Remove the workpiece, if present.
4. Plug the power cord back into the power source.
5. Press the reset button (2).
6. Turn the ON/OFF switch to the ON position.
WARNING:
IF YOU HAVE TO REMOVE A WORKPIECE FROM THE THICKNESS
PLANER, MAKE SURE THE ON/OFF SWITCH IS IN THE OFF POSITION AND THE
POWER CORD IS REMOVED FROM THE POWER SOURCE.
VII. Operation
14
Fig. 6
1
2
