background image

 

26 

3-Year Limited Warranty 

 
This Mastercraft product is guaranteed for a period of 3 years from the date of 
original retail purchase against defects in workmanship and materials, except for the 
following components: 
 

a)  Component A: Batteries, chargers and carrying cases, which are 

guaranteed for a period of 2 years from the date of original retail purchase 
against defects in workmanship and materials; 

b)  Component B: Accessories which are guaranteed for a period of 1 year 

from the date of original retail purchase against defects in workmanship 
and materials. 

 
Subject to the conditions and limitations described below, this product, if returned to 
us with proof of purchase within the stated warranty period and if covered under this 
warranty, will be repaired or replaced (with the same model, or one of equal value or 
specification),at our option. We will bear the cost of any repair or replacement and 
any costs of labour relating thereto. 
 
These warranties are subject to the following conditions and limitations: 
 

a)  A bill of sale verifying the purchase and purchase date must be provided; 
b)  This warranty will not apply to any product or part thereof that is worn or 

broken or that has become inoperative due to abuse, misuse, accidental 
damage, neglect or lack of proper installation, operation or maintenance 
(as outlined in the applicable 

owner’s manual or operating instructions) or 

that is being used for industrial, professional, commercial or rental 
purposes; 

c)  This warranty will not apply to normal wear and tear or to expendable parts 

or accessories that may be supplied with the product that are expected to 
become inoperative or unusable after a reasonable period of use; 

d)  This warranty will not apply to routine maintenance and consumable items, 

including but not limited to fuel, lubricants, vacuum bags, blades, belts, 
sandpaper, bits, fluids, tune-ups or adjustments; 

e)  This warranty will not apply where damage is caused by repairs made or 

attempted by others (i.e.: persons not authorized by the manufacturer); 

f) 

This warranty will not apply to any product that was sold to the original 
purchaser as a reconditioned or refurbished product (unless otherwise 
specified in writing); 

 

Page 1 of 2 

 

Summary of Contents for 54-8235-6




























Reviews: