14
ASSEMBLY & OPERATION
Setting the fan speed
– cont’d
1. Turn ON/OFF switch to ON position
(Fig. 1).
2. To increase the fan speed, press the
upper fan speed button (1) once
(Fig. 2). Each time this button is
pushed, one additional speed
indicator bar (2) will be shown in the
LCD window (maximum 5).
3. To decrease the fan speed, press the
lower fan speed button (3) once. Each
time this button is pushed, one less
speed indicator bar will be shown in
the LCD window.
NOTE:
A maximum of five fan speed
indicator bars can be shown. One bar
showing indicates that the fan is
turning at its slowest speed. Two,
three or four bars showing indicates
intermediate fan speeds. Five bars
showing indicates that the fan is
turning at its fastest speed.
Setting the temperature
The temperature of the air within the
heating chamber can be set anywhere
between 50°C (122°F) and 650°C (1202°F)
in 10°C (18°F) increments.
NOTES:
a. Temperatures displayed in the LCD
window are °C.
b. Slower fan speeds will result in greater
heat loss between the heating
chamber and the nozzle.
1. Turn ON/OFF switch to ON position
(Fig. 1).
2. To increase the air temperature, press
the right hand temperature button (4)
once (Fig. 3). Each time this button is
pushed, the indicated temperature (5)
in the LCD window will increase by
10°C (18°F).
3. To decrease the air temperature,
press the left hand temperature button
(6) once. Each time this button is
pushed, the indicated temperature in
the LCD window will decrease by
10°C (18°F).
NOTES:
a. To rapidly adjust the air temperature,
hold the appropriate temperature
button down until the desired
temperature is displayed.
b. When large temperature adjustments
are made, the indicator arrows (7) will
flash and the indicated temperature
will change in 1°C (18°F) increments
until the set temperature is reached.
Fig. 2
Fig. 3