13
INSTALLING A BATTERY IN THE
CORDLESS VACUUM
1. Remove the discharged battery (1)
from the tool by pressing on the
battery release button (2) located in
front of the handle (Fig. 1).
2. Pull the battery out of the tool handle
(3).
3.
Slide the fully charged battery into the
matching cavity in the tool handle
where the discharged battery has
been removed.
NOTE:
Make sure the battery is fully
engaged with the mounting slots in the tool
handle. The battery release button will
“click” into place when the battery is fully
installed
.
WARNING:
Do not immerse the
battery pack in water. Sudden cooling
could cause the hot battery to explode or
leak.
DUST CONTAINER AND FILTER
1. Press down on the dust container
release button (1) (Fig. 2).
2. Slide the dust container (2) forward
and remove it from the motor housing
(3).
3. Pull the dust filter retainer assembly
(4) out of the dust container (Fig. 3).
ASSEMBLY AND OPERATING
!
Fig. 3
Fig. 1
Fig. 2
Summary of Contents for 54-3672-4
Page 12: ...12 CONTENTS ...
Page 20: ...20 EXPLODED VIEW ...
