Replacing Your Battery
If the battery symbol appears on the display, the battery should be replaced.
Use only fresh and correct 6F22 type 9 V battery.
Turn the multimeter to the "OFF" position and disconnect the test leads.
Remove the screw on the back of the multimeter, and remove the back
cover. Remove old battery and insert a new one.
Replace the back cover and tighten screw.
Dispose of old battery properly.
Changing Fuses
500 mA/250 V
Turn the multimeter to the "OFF" position and disconnect the test leads.
Remove the screw on the back of the multimeter, and remove the back
cover. Remove the battery followed by removing the dead fuse.
Insert the new fuse and re-insert the battery.
Replace the back cover and tighten screw.
10 A/250 V
Have the fuse replaced by a qualified service technician.
10
