headline bars
continuation tabs
notes
warnings
9
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
9
POWER LEVEL SWITCH
ADJUSTABLE THERMOSTAT WITH ANTI-FREEZING SETTINGS
TURNING OFF
This heater has two heat settings:
1300 and 1500 W. Use the higher
setting (1500 W) to raise the room
temperature quickly. When the desired
temperature is reached, use the lower
1300 W setting. It is usually sufficient
to maintain a comfortable temperature.
2
After heater has been turned on
and the room has reached the
desired temperature, slowly rotate
the thermostat knob
counter-clockwise until the heater
shuts off (you should hear a faint
“click”). By leaving the thermostat
at this setting it will automatically
maintain this temperature. To
lower temperature, rotate the knob
further counter-clockwise (towards
the LOW position). To raise the
temperature, rotate the thermostat
knob clockwise (towards the HIGH
position).
3
Turn the On/Off power
level/fan dial to the OFF position
before unplugging or plugging
in the heater. Heater should be
unplugged when not in use. To
disconnect heater, turn controls to
OFF, then remove plug from outlet.
4
When set to the anti-freeze setting, the
heater will turn on whenever the tem-
perature drops below 40°F (4ºC), which
is helpful to economically prevent ice
formation in garages and other
unheated spaces.
NOTE:
To prevent overloading a circuit, do not plug the heater into a circuit that is servicing other electrical needs.
OPERA
TING INSTRUCTIONS