STEP 16 INSTALL THE SIDE HANDLE
Simply position the side handle (2) over the holes and attach with four M6 x 12 hex bolts (1).
Tighten securely. The cabinet is ready for use.
DRAWER REMOVAL
DRAWER REPLACEMENT
Extend the drawer slides from the tool chest or cabinet.
Insert the brackets on each side of the drawer into the slots
in the slides, being careful that they are properly positioned.
Once properly inserted, completely close the drawer to set
the slides in their proper positions.
Push down - one side
Pull up - other side
Pull the drawer out until it is extended to the maximum.
There are two black release levers: one on each side of
the drawer. Pull one up while you push the other one
down simultaneously. At the same time, pull the drawer
out of the drawer slides.
1
2
17
ASSEMBL
Y INSTRUCTIONS
