5
ASSEMBLY INSTRUCTIONS
3.
Attach the bottom back panel (Part
10), middle back panels (Part 9) and top
back panel (Part 8) to the assembled
cabinet frame. Starting from the bottom
back panel, insert a total of 41 tM4 x 8
screws (Part 19) into the screw holes of
all the back panels and tighten them
using the screwdriver (Part 21) (see Fig.
C).
Note:
Two screw holes for corner protectors are
reserved across the top panel and the bottom panel.
4.
Attach the levelling feet (Part 24) to
the four corners of the bottom panel (Part
4) using the wrench (Part 25) (see Fig. D).
5.
Turn the cabinet frame to upright
position.
6.
Choose desired height for placing
each middle shelf (Part 5) inside the
cabinet frame. Then pull down the hooks
(Part 13) into the hook slots provided,
making sure the four hooks are placed at
the same height. Place the shelves into
the cabinet frame and press them down
onto the hooks (see Fig. E).
7.
Attach one of two magnets (Part 23) to
the top panel (Part 3) and another magnet
to the bottom panel (Part 4). Insert two
M4 x 8 screws (Part 19) into each
magnet and tighten them using the
screwdriver (part 21) (see Fig. F).
Note:
The black plate of the magnet
(Part 23) should be facing the front.
Fig. F
Fig. E
Fig. D
Fig. C
