MasterCraft 060-0590-0, Instruction Manual, Page: 15 / 24

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
15
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
MAINTENANCE
REMOVE/INSTALL THE BLADE (fig. 9)
After prolonged use, especially in sandy soil
conditions, the blade will become worn and lose
some of the original shape, which will reduce the
cutting efficiency. Therefore, the blade should be
replaced to ensure a good cutting performance.
1. Remove the safety key and battery pack.
2. Turn the mower upside down. Keep the underbody
and blade clean and free of debris.
3. Use a piece of wood to keep the blade from
turning, loosen the hex bolt counter-clockwise
using a suitable wrench and remove it together
with the blade.
4. Attach a new blade of the same type
(MASTERCRAFT ® 060-1542-0 replacement
mower blade) onto the spindle while maintaining
the correct alignment. Insert the hex bolt on
the spindle. Use a piece of wood to keep the
blade from turning, and then tighten the hex bolt
clockwise to ensure safe operation of your product.
CLEAN THE MOWER
The underside of mower deck should be cleaned after each use as grass clippings, leaves, dirt and
other debris will accumulate. This accumulation is undesirable, and it will promote rust and corrosion
on metal parts and reduce the cutting efficiency of the mower. Wipe the mower clean with a damp
cloth.
MAINTENANCE
fig. 9b
fig. 9a
Bolt
Blade
Fan