MasterCraft 058-9807-2 Operating Manual Download Page 15

29

model no. 058-9807-2 | contact us 1-800-689-9928

28

PROBLEM

POSSIBLE CAUSES

SOLUTIONS

3-Year Limited Warranty

This product is guaranteed for a period of 3 years from the date of original retail purchase 

against defects in workmanship and materials, except for the following component:

Component A: 

Accessories, which are guaranteed for a period of 1-year from the date of 

original retail purchase against defects in workmanship and materials.

Subject to the conditions and limitations described below, this product, if returned to us 

with proof of purchase within the stated warranty period and if covered under this 

warranty, will be repaired or replaced (with the same model, or one of equal value or 

specification), at our option. We will bear the cost of any repair or replacement and any 

costs of labor relating thereto.

These warranties are subject to the following conditions and limitations:

A bill of sale verifying the purchase and purchase date must be provided.

This warranty will not apply to any product or part thereof which is worn or broken or 

which has become inoperative due to abuse, misuse, accidental damage, neglect, or lack 

of proper installation, operation, or maintenance (as outlined in the applicable instruction 

manual or operating instructions), or which is being used for industrial, professional, 

commercial, or rental purposes.

This warranty will not apply to normal wear and tear or to expendable parts or accessories 

that may be supplied with the product which are expected to become inoperative or 

unusable after a reasonable period of use.

This warranty will not apply to routine maintenance and consumable items such as, but 

not limited to, fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, fluids, 

tune-ups, or adjustments.

This warranty will not apply where damage is caused by repairs made or attempted by 

others (i.e., persons not authorized by the manufacturer).

This warranty will not apply to any product that was sold to the original purchaser as a 

reconditioned or refurbished product (unless otherwise specified in writing).

a)

b)

c)

d)

e)

f) 

This warranty will not apply to any product or part thereof if any part from 

another manufacturer is installed therein or any repairs or alterations have 

been made or attempted by unauthorized persons.

This warranty will not apply to normal deterioration of the exterior finish, such 

as, but not imited to, scratches, dents, paint chips, or to any corrosion or 

discoloring by heat, or abrasives and chemical cleaners.

This warranty will not apply to component parts sold by and identified as the 

product of another company, which shall be covered under the product 

manufacturer’s warranty, if any.

g) 

h)

i)

This warranty applies only to the original purchaser and may not be 

transferred. Neither the retailer nor the manufacturer shall be liable for any 

other expense, loss or damage, including, without limitation, any indirect, 

incidental, consequential, or exemplary damages arising in connection with 

the sale, use, or inability to use this product.

This warranty gives you specific legal rights, and you may have other rights, 

which may vary from province to province. The provisions contained in this 

warranty are not intended to limit, modify, take away from, disclaim, or 

exclude any statutory warranties set forth in any applicable provincial or 

federal legislation.

Additional limitations

Notice to consumer

Made in China

Imported by Mastercraft Canada Toronto, Canada M4S 2B8

WARRANTY

WARRANTY

Summary of Contents for 058-9807-2
















Reviews: