TROUBLESHOO
TING
19
AIR
-
POWERED SIPHON
-
FEED SPRAY GUN 058
-
9336
-
2
Troubleshooting
The following chart lists common issues and solutions. Please read it carefully and follow all
instructions closely.
•
Disconnect electrical plug and air supply fr
om the tool before making any adjustments.
•
Repairs must be performed by a qualified service technician only.
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
If any of the following symptoms appears wh
ile the tool is in use, turn it off and
disconnect it from
the air supply immediately. Failure to heed this warning
could result in serious personal injury.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
Fluttering or spitting
1. Paint level inside the canister
is too low.
2. Canister is not placed on a
planar surface.
3. Fluid inlet connection is loose.
4. Fluid tip/seat is loosened or
damaged.
5. The fluid needle nut is dry or the
round nut is loose.
6. Air vent is clogged.
1. Add paint inside the canister.
2. Place the canister on a planar surface.
3. Tighten the connection.
4. Adjust or replace.
5. Lubricate the fluid adjustment needle and/or
tighten the round nut.
6. Clear the vent hole.
Arc
-
shaped pattern
1. Fluid nozzle is worn or loose.
2. Paint has built up on air cap.
1. Tighten or replace fluid nozzle.
2. Remove obstructions from holes, but don’t
use metal objects to clean it.
MC-OM-08
MC-OM-09
