IMPOR
TANT INFORMA
TION
13
AIR
-
POWERED MINI PALM
-
GRIP NAILER 058
-
8987
-
8
Read this Instruction Manual carefully before using the Air
-
powered Mini Palm
-
grip Nailer.
•
Read and follow all the safety instructions at the beginning of this manual. Inspect the
Air
-
powered Mini Palm
-
grip Nailer prior to each use in order to
–
ensure that the proper power source is being used.
–
verify that the tool is in proper working order.
•
It is recommended that a filter
-
regulator
-
lubricator be used and be located as close to the tool
as possible.
•
If a filter
-
regulator
-
lubricator is not installed, place up to 6 drops of compressor oil into the air
inlet plug before each use.
•
If a filter
-
regulator
-
lubricator is installed, keep the air filter clean. A dirty filter will reduce the
air pressure to the tool, which will cause a reduction in power, efficiency, and general
performance.
•
For optimal performance, install a quick connector to the tool and a quick coupler on the
hose, if applicable.
•
Verify that all of the connection
s in the air supply system are sealed in order to prevent air
leakage.
WARNING!
Potential hazard that could result in serious injury or loss of life.
•
Do not use the tool if it is not in proper working order.
•
Do not use oxygen or any other combusti
ble or bottled gas to power this tool.
•
Do not use this tool in the presence of any flammable liquids or gases.
•
Keep hands and other parts of the body
away from the firing head during use.
•
Do not point the tool towards
the operator or other people.
•
Do not attempt to clear a jammed na
il when the air hose is connected.
•
Do not drive a nail on top of an existing nail. Failure to comply could lead to
serious injury or loss of life.
